….

Whats New

  • ArduinoUnoR3

    ,

    Arduino UNO R3

    The Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started

    500.00
    Add to Cart
  • mega2560

    ,

    Arduino MEGA 2560

    The Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

    800.00
    Add to Cart
  • ArduinoCheapUno2

    ,

    UNO R3 SMD – Economic

     

    The Uno R3 module is a cheap alternative to the Arduino Uno Boards. It is equipped with an ATMEL AVR ATmega328P microcontroller and a updated USB-controller for cost reduction. The specifications are equal to Arduino Uno R3.
    The board is shipped with the shown pin headers.

    Please note that the boards have a CH340G USB-Controller. They are recognized on Linux without any additional drivers. Mac OS and Windows users may need to install an additional driver.

    400.00
    Add to Cart
  • promini

    ,

    Arduino ProMini 5V/16MHZ

    The Arduino Pro Mini is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.

    The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.

    400.00
    Add to Cart
  • ARDUINO_NANO_03

    ,

    Arduino Nano V3

    The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) orATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.

    400.00
    Add to Cart
  • sku_328572_2

    ,

    Arduino WiFi Shield CC3000

    The CC3000 WiFi module from Texas Instruments is a small silver package which finally brings easy-to-use, affordable WiFi functionality to your Arduino projects.

    It uses SPI for communication so you can push data as fast as you want or as slow as you want. It has a proper interrupt system with IRQ pin so you can have asynchronous connections. It supports 802.11b/g, open/WEP/WPA/WPA2 security, TKIP & AES. A built in TCP/IP stack with a “BSD socket” interface supports TCP and UDP in both client and server mode, with up to 4 concurrent socket connections.

    2,800.00
    Add to Cart
  • HT1rjz1FGdXXXagOFbXH

    ,

    W5100 Ethernet Shield

    The Arduino Ethernet Shield  uses the Wiznet W5100 and includes an microSD card slot. The shield uses the six pin ICSP header for the SPI signals, making it compatible with both the regular Arduino form factor (Duemilanove, Uno) and also the Mega 1280 and Mega 2560 Arduinos

    800.00
    Add to Cart
  • RPI2A

    ,

    Raspberry Pi 2 Model B

    The latest addition to the Raspberry Pi family, the Raspberry Pi 2 takes the platform to a completely new level. Combining a sixfold increase in processing power and a doubling of memory capacity with complete backward compatibility with the existing Model B+, Raspberry Pi 2 is the perfect board for professionals and hobbyists alike.

    The new Raspberry Pi 2 – Model B is jam packed with features! With a new quad core processor and twice the memory with a massive 1GB RAM, It’s a whopping 6x faster than its predecessor. The ultra-low-cost, deck-of-cards sized Linux computer has had a makeover, and it’s a good one at that!

    3,200.00
    Add to Cart
  • sku_156155_1

    ,

    USB Host Shield

    The Keyes USB Host Shield allows you to connect a USB device to your Arduino board. It is based on the MAX3421E , which is a USB peripheral/host controller containing the digital logic and analog circuitry necessary to implement a full-speed USB peripheral or a full-/low-speed host compliant to USB specification rev 2.0. This is based on revision 2.0 of USB Host Shield. it is compatible with more Arduinos – not only UNO and Duemilanove, but also Mega and Mega 2560 work with Standard variant of this shield out of the box. No more SPI re-wiring and code modifications – just solder included stackable connectors (2×3 ICSP connector’s female side should be facing down), plug and play!

    1,100.00
    Add to Cart
  • OV7670 Camera Module_C

    ,

    OV7670 Camera module

    OV7670 image sensor, small volume, low operating voltage, providing all functions of a single chip of VGA camera and image processor. Through SCCB bus control, the sensor can output the whole frame, sampling, and various resolution 8 bits of data. The product VGA image can reach up to a maximum of 30 frames per second. Users can completely control the image quality, data format and transmission mode. All the process of image processing functions can be through the SCCB programming interface, including gamma curve, white balance, saturation and chroma .

    750.00
    Add to Cart

Best Selling

  • 3-5mm-4-0mm-3mm-2mm-Gold-Bullet-Connector-OH091205-

    Bullet Connector 3.5mm

    New

    A brand-new, unused, unopened, undamaged item (including handmade items). Please see the seller’s listing for full details.

    Used

    An item that has been used previously. See the seller’s listing for full details and description of any imperfections.

    35.00
    Add to Cart
  • motor Wencoder 350rpm 12v

    ,

    12V DC Motor 350RPM w/Encoder (12kg*cm)

    This is a gear motor with encoder. It is a motor with a 34:1 gearbox and an integrated quadrature encoder that provides a resolution of 11 pulse single per round giving a maximum output of 374 within one round. With an Arduino controller and motor driver, applications for this include a closed-loop PID control or PWM motor speed control. This motor is an ideal option for mobile robot projects. The copper output shaft, embedded thread and reinforced connector greatly extends the motor’s service life.

    3,000.00
    Add to Cart
  • Foxnovo-FS-CT6B-24GHz-6-Channel-Digital-LCD-Transmitter-Receiver-Radio-Control-System-for-RC-Helicopter-0-500x500

    ,

    FlySky FS-CT6B 2.4GHz 6 Channel Transmitter and Receiver Radio System

    The FS-CT6B is a professional and practical 2.4GHz 6-Channel digital LCD transmitter, which is equipped with a FS-R6B receiver to make a digital proportional radio control system, and suitable for RC airplane, glider and helicopter. The transmitter adopts easy-to-read LCD screen to show the working status.

    4,500.00
    Add to Cart
  • ArduinoUnoR3

    ,

    Arduino UNO R3

    The Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started

    500.00
    Add to Cart
  • mega2560

    ,

    Arduino MEGA 2560

    The Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

    800.00
    Add to Cart
  • Current-SCT-013-031

    Current Sensor (SCT-013-030) Non-Invasive – 30A AC/DC

    Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for measuring whole building electricity consumption (or generation for that matter).
    The split core type such as the CT in the picture above, is particularly suitable for DIY use it can be clipped straight on to either the live or neutral wire coming into the building without having to do any high voltage electrical work.
    800.00
    Add to Cart
  • Untitled

    ,

    30A SimonK Prgramme RC Brushless ESC For Quadcopter Multicopter

    Highest efficiency 100% N-FET design.

    Highest accuracy with Crystal Oscillator (Temperature won’t affect the PWM operating range like other cheap ESC’s).

    No low voltage cutoff, because any cutoff in a multirotor = crash.

    No over temp cutoff, because any cutoff in a multirotor = crash.

    Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate.

    16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).

    Super simple, foolproof operation! Nothing to program other than the throttle range.

    1,300.00
    Add to Cart
  • Xilinx Programmer

    ,

    Platform Cable USB, XILINX Programmers & Debuggers

    Description

    The Platform Cable USB a USB compatible cable for in-circuit configuration and programming of all Xilinx devices. It is compatible with the original XILINX Platform Cable USB.

    4,200.00
    Add to Cart
  • motor 12v151rpm1

    Metal DC Geared Motor w/Encoder – 12V 251RPM 18Kg.cm

    This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 700 counts per revolution of the gearbox’s output shaft.
    These units have a 0.61″ long, 6 mm(0.24″)-diameter D- shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V.
    The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm(0.61″) apart.
    This motor is an ideal option for your mobile robot project.
    Warning: Do not screw too far into the mounting holes as the screws can hit the gears. Manufacturer recommends screwing no further than 3mm (1/8″) into the screw hole.
    3,000.00
    Add to Cart
  • xt60

    XT60 plug

    XT60 Plug for RC models

    Are you still using deans or banana plugs? They are out. Hobby-wing.com is glad to represent you the latest super plug, XT60. After over one yearˇs research on all current plugs in the market, thousands of experiments, finally XT60 plug comes into being. It solves all the shortcomings of other plugs and will stand out as the standard plug for RC models.

    80.00
    Add to Cart

Worldwide Shiping

Meet your international shipping needs with guaranteed time-definite and day-definite worldwide delivery based on your shipment’s destination.

30 Days Return

We promise to be your trusted partner for technology by delivering the advice, service and convenience you deserve — all at competitive prices. If you are not fully satisfied with your purchase, let us help you with a replacement, return or repair.

Customer Support

This is Photoshop’s version of Lorem Ipsum. Proin gravida nibh vel velit auctor aliquet. Aenean sollicitudin, lorem quis bibendum auctor, nisi elit consequat ipsum, nec