View
  • 3892ad6b-3324-4790-bddf-0197ed6ca8f8

    , , ,

    WeMos D1 — UNO like wifi board based ESP-8266

    WeMos D1 WiFi UNO ESP-12E Based ESP8266 Shield For Arduino Compatible

    Description:

    This is the old version of WeMos D1.
    11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
    1 analog input(3.3V max input)
    A Micro USB connection
    A power jack, 9-24V power input.
    Compatible with Arduino
    Compatible with nodemcu

    Infos: click here!!

    Package included:

    1 x WeMos D1 WiFi UNO ESP-12E Based ESP8266 Shield For Arduino Compatible

    800.00
    Add to Cart
  • lilypadMainBoard

    Arduino LilyPad

    This is LilyPad Arduino – the main board consisting of an ATmega168V with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. Board will run from 2V to 5V. The latest version of the LilyPad supports automatic reset for even easier programming. The back side of the LilyPad is now completely flat! It has a surface mount programming connector to keep the header from poking through.

    The LilyPad is compatible with an FTDI cable and the Arduino LilyPad/Pro/ProMini Programmer. This allows the LilyPad to work with the auto-reset feature used in the Arduino software. The LilyPad is no longer compatible with the LilyPad USB Link.

    LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

     

    750.00
    Add to Cart
  • ili9340 uno

    ,

    2.4″ TFT LCD Shield For Arduino UNO R3 (ILI9340)

    Product Description

    • Only need 4-6 IOs (D13~D8(SCK, DO, DI, CS), AO(DC), RST) to control
    • 240*320 Resolution for 2.2”, and 128*160 for 1.8”
    • QVGA display, very great display quality
    • Includes SD Slot for all versions
    • Touch screen function: Available for 2.4” and 2.8”, TP control IC XPT2046.
    • Get many arduino library support, we tested UTFT library, adafruit library and arduino official TFT library, see the “displaytext” demo that using TFT library here (works for 1.8”).
    • Stable product supplier and constant good quality, good for large batch using, compare to Nokia 5110 LCD (savaged second-hand), it is double price but better quality and stable supplying.
    950.00
    Add to Cart
  • HX8357B

    ,

    3.0/3.2″ 480×320 IPS TFT LCD for Arduino MEGA2560 (HX8357B)

    IPS 3.0 inch 36P HD TFT LCD Color Screen Module 

    • Size: IPS 3.2 inch TFT
    • Module Size: 89.92(W)*54.25(L) (mm)
    • Active View: 67.68(W)*42.12(L) (mm)
    • Resolution: 480*320 (Pixel)
    • Drive IC: HX8357C
    • PIN No.: 36Pin (Compatible for Mega2560)
    • Backlight: 6 LED
    • Touch: No
    • Module Power: 5V / 3.3V
    • Data Bus: 16bit parallel interface
    • Power: 80-110 (mA)
    1,350.00
    Add to Cart
  • lilypad-coin-cell-battery-holder-cr2032-module-ubitronix-1606-04-ubitronix@27

    ,

    LilyPad Coin Cell Battery Holder

    ·       This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on the LilyPad slide switch board, so it’s not easy to accidentally turn off or on.

    ·       Just like the original Coin Cell Battery Holder, this simple board holds a 20mm coin cell battery (such as a CR2032) and gives you 4 connection points (two positive and two negative) for sewing into your project.

    ·       Size: (LxWxH) 2.89×3.01×0.55cm / 1.14″x1.19″x0.22″

    200.00
    Add to Cart
  • AURDINO UNOR3

    ,

    Arduino Uno R3 – Original Italian

    INTRODUCTION

    This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.

    The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.

    Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

    Warnings: The Arduino Uno R3 requires the Arduino 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine. If you are interested in reading more about the changes to the IDE, check out the official Arduino 1.0 Release notes!

    3,000.00
    Add to Cart
  • BEETLY

    Beetle

    INTRODUCTION

    The new generation “Beetle” controller derives its core notion from minimalism without compromising functionality. It comes with Atmel AtMega32u4 (datasheet) @16MHz clock time and has expanded amounts of interfaces: 10 digital pins, 5 analog pins and 4 pwn pins. To further make it user-friendly, it is compatible with Micro USB so that direct programming and testing is no longer a headache. Select “Arduino Leonardo (tools >board > Arduino Leonardo in Arduino IDE), the ATmega32U4 comes preburned with a bootloader that allows you to upload any new code that is applicable to Arduino Leonardo.

    As a minimalized version of Arduino Leonardo, it enjoys similar powerful functionalities. Beetle aims to solve problems of low-cost controller, ease-of-using properly, and to provide a low cost solution for disposable projects, such as DIY projects, workshops, gift projects, E-Textiles and educational. For students and makers who can not afford too much on hardware purchasing, Beetle can be a great solution for them.

    950.00
    Add to Cart
  • AURDINO YUN

    Arduino Yún – ORIGINAL-

    INTRODUCTION

    The Arduino Yún is a newcomer microcontroller board in the Arduino boards family. It is a microcontroller board based on the ATmega32u4 (datasheet) and the Atheros AR9331. The Atheros processor supports a Linux distribution based on OpenWRT named Linino. The board has built-in Ethernet and WiFi support, a USB-A port, micro-SD card slot, 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and 3 reset buttons.
    The Yún distinguishes itself from other Arduino boards in that it can communicate with the Linux distribution onboard, offering a powerful networked computer with the ease of Arduino. In addition to Linux commands like cURL, you can write your own shell and python scripts for robust interactions.
    8,500.00
    Add to Cart
  • aur wifi

    Arduino UNO WIFI – ORIGINAL

    INTRODUCTION

    The Arduino UNO WiFi board is based on the ATmega328 and it has an integrated ESP8266 WiFi Module. If you are starting out with Arduino, or starting with IoT, this is the board to get.The Arduino Uno Wi-Fi is the new Arduino Uno with an integrated Wi-Fi module! The board is based on the ATmega328P with an ESP8266 Wi-Fi Module integrated. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

    The ESP8266 Wi-Fi Module is a self contained SoC with integrated TCP/IP protocol stack that can give access to your Wi-Fi network. (Or the device can act as an access point.) One useful feature of Uno Wi-Fi is support for OTA (over-the-air) programming, either for transfer of Arduino sketches or Wi-Fi firmware.

    4,300.00
    Add to Cart
  • usbtinyisp

    , ,

    USBtinyISP-Arduino bootloader programmer

    INTRODUCTION

    This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino.

    This programmer works really well for ATmega168 and ATmega328 and should work with all the AVR micros supported by AVRDUDE.  Both 10-pin and 6-pin targets supported (cable included) which makes the progrmmer suitable for most AVR boards.

    This programmer is based on  USBtiny code & design Version 2.0

    The Kit comes with both 6-pin and 10-pin AVR-standard connectors and cables.

    Product Update Log

    • 2011/08/23 : The  Verion 1 has  identified that 10 PIN IDC has incorrect MISO and  MOSI Pin out.    It will be fixed in version V1.1 
    • V3 hardware revision has a board layout update increasing usability. Compatible with older versions.
    1,500.00
    Add to Cart
  • 8Ch. Ethernet  Relay Cont.

    , , ,

    8 Channel Ethernet Relay Controller (Support PoE & USB)

    With Ethernet relay, IoT has become so easy. RLY-8-POE-USB is a POE & USB controlled 8 channel relay controller based on STM32. With this module users are able to do remote control/ switching power supply centralized management, the purpose of this product can be directly by net POE power supply switch power supply is connected to the Internet, so you just need to a cable link equipment, suitable for: home decoration, hotel, shopping mall management, Internet cafes, karaoke time, daily office, stores monitoring, networking, industrial control equipment, test equipment, power control, unattended, underground pipes, mining equipment, ships, machine room, street lamp management, intelligent management and centralized management.

    Please read the PoE compatiblity issue before you buy:
    We have passed the test on PoE Switches, list as

    • ONV POE31004P
    • Tenda TEF1008P
    6,200.00
    Add to Cart
  • digispark5

    ,

    Digispark – The tiny, Arduino usb dev board

    The micro-sized, Arduino enabled, usb development board – cheap enough to leave in any project!

    Digispark is an ATtiny85 based microcontroller development board come with USB interface. Coding is similar to Arduino, and it use the familiar Arduino IDE for development.

    450.00
    Add to Cart
  • promini

    ,

    Arduino ProMini 3V3/8MHZ

    The Arduino Pro Mini is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.

    The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.

    550.00
    Add to Cart
  • HTB1DjmALVXXXXchXFXXq6xXFXXXk

    ,

    Arduino Starter Kit (RFID Based) SKU-167

    Advanced Version Starter Kit the RFID learn Suite Kit LCD 1602 for Arduino UNO R3

    4,200.00
    Add to Cart
  • VUPN5940-1

    ,

    Dual-axis XY Joystick Module for Arduino

    Specifications:
    • Arduino, Raspberry Pi, and MSP430 compatible
    • Ability to control X and Y axis
    • Push-button switch built into the joystick, just push the joystick inward to engage the switch
    150.00
    Add to Cart
  • 37-in-1-font-b-Sensors-b-font-Modules-Starter-font-b-Kit-b-font-for

    , ,

    37 in 1 Sensor Module Kit for Arduino And Raspberry Pi

    With this 37 in 1 sensor ultimate package compatible with Arduino & Raspberry Pi , you can do almost all the experiment you can think of , never need to worry about again you don’t have proper materials . this do save you a lot of time .

    2,000.00
    Add to Cart
  • gpsshield1

    , ,

    GPS Arduino Shield

    This is a GPS module breakout board with SD storage based on the u-blox NEO-6M GPS  and its foot print is compatible with arduino boards . This board features an SD card socket, which makes it convenient for building data loggers.

    3,000.00
    Add to Cart
  • OV7670 Camera Module_C

    ,

    OV7670 Camera module

    OV7670 image sensor, small volume, low operating voltage, providing all functions of a single chip of VGA camera and image processor. Through SCCB bus control, the sensor can output the whole frame, sampling, and various resolution 8 bits of data. The product VGA image can reach up to a maximum of 30 frames per second. Users can completely control the image quality, data format and transmission mode. All the process of image processing functions can be through the SCCB programming interface, including gamma curve, white balance, saturation and chroma .

    750.00
    Add to Cart
  • sku_156155_1

    ,

    USB Host Shield

    The Keyes USB Host Shield allows you to connect a USB device to your Arduino board. It is based on the MAX3421E , which is a USB peripheral/host controller containing the digital logic and analog circuitry necessary to implement a full-speed USB peripheral or a full-/low-speed host compliant to USB specification rev 2.0. This is based on revision 2.0 of USB Host Shield. it is compatible with more Arduinos – not only UNO and Duemilanove, but also Mega and Mega 2560 work with Standard variant of this shield out of the box. No more SPI re-wiring and code modifications – just solder included stackable connectors (2×3 ICSP connector’s female side should be facing down), plug and play!

    1,100.00
    Add to Cart
  • HT1rjz1FGdXXXagOFbXH

    ,

    W5100 Ethernet Shield

    The Arduino Ethernet Shield  uses the Wiznet W5100 and includes an microSD card slot. The shield uses the six pin ICSP header for the SPI signals, making it compatible with both the regular Arduino form factor (Duemilanove, Uno) and also the Mega 1280 and Mega 2560 Arduinos

    800.00
    Add to Cart
  • sku_328572_2

    ,

    Arduino WiFi Shield CC3000

    The CC3000 WiFi module from Texas Instruments is a small silver package which finally brings easy-to-use, affordable WiFi functionality to your Arduino projects.

    It uses SPI for communication so you can push data as fast as you want or as slow as you want. It has a proper interrupt system with IRQ pin so you can have asynchronous connections. It supports 802.11b/g, open/WEP/WPA/WPA2 security, TKIP & AES. A built in TCP/IP stack with a “BSD socket” interface supports TCP and UDP in both client and server mode, with up to 4 concurrent socket connections.

    2,800.00
    Add to Cart
  • ARDUINO_NANO_03

    ,

    Arduino Nano V3

    The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) orATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.

    400.00
    Add to Cart
  • promini

    ,

    Arduino ProMini 5V/16MHZ

    The Arduino Pro Mini is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.

    The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.

    400.00
    Add to Cart
  • ArduinoCheapUno2

    ,

    UNO R3 SMD – Economic

     

    The Uno R3 module is a cheap alternative to the Arduino Uno Boards. It is equipped with an ATMEL AVR ATmega328P microcontroller and a updated USB-controller for cost reduction. The specifications are equal to Arduino Uno R3.
    The board is shipped with the shown pin headers.

    Please note that the boards have a CH340G USB-Controller. They are recognized on Linux without any additional drivers. Mac OS and Windows users may need to install an additional driver.

    400.00
    Add to Cart
  • mega2560

    ,

    Arduino MEGA 2560

    The Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

    800.00
    Add to Cart
  • ArduinoUnoR3

    ,

    Arduino UNO R3

    The Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started

    500.00
    Add to Cart