View
  • 3892ad6b-3324-4790-bddf-0197ed6ca8f8

    , , ,

    WeMos D1 — UNO like wifi board based ESP-8266

    WeMos D1 WiFi UNO ESP-12E Based ESP8266 Shield For Arduino Compatible

    Description:

    This is the old version of WeMos D1.
    11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
    1 analog input(3.3V max input)
    A Micro USB connection
    A power jack, 9-24V power input.
    Compatible with Arduino
    Compatible with nodemcu

    Infos: click here!!

    Package included:

    1 x WeMos D1 WiFi UNO ESP-12E Based ESP8266 Shield For Arduino Compatible

    800.00
    Add to Cart
  • WIFI501-4 (1)

    WIFI232 Eval Kit

    WIFI232 Eval Kit is a WiFi to UART Evaluation Kit, including a convertor module WIFI232-B, and a mother board WIFI501 for testing/evaluating.

    3,000.00
    Add to Cart
  • wifi400-5_2

    WIFI-LPT100 Eval Kit

    WIFI-LPT100 Eval Kit is a WiFi module evaluation kit consists of the WiFi module WIFI-LPT100, and the mother board WIFI400.

    2,050.00
    Add to Cart
  • WIFI-LPB100-B-Eval-Kit-LPB100-WiFi-Module-USB-to-UART-USB-Wifi-Wireless-Communication-Development

    WIFI-LPB100-B Eval Kit

    WIFI-LPB100-B Eval Kit is a WiFi module evaluation kit designed for the WiFi module WIFI-LPB100-B.

    2,000.00
    Add to Cart
  • Ethernet Interface Board - ENC28J60 module Arduino-500x500

    Ethernet Interface – ENC28J60

    The ENC28J60 Ethernet Module is a low-cost ethernet module that offers ethernet connectivity over SPI. This module is different from the ENC28J60 Ethernet Shield only in its form factor and the fact that there is no SD card slot. This module can be interfaced with any microcontroller over SPI.

    550.00
    Add to Cart
  • dp83848

    DP83848 Ethernet Board

    The DP83848 Ethernet Board is an accessory board includes an onboard Ethernet Physical Layer Transceiver DP83848, RJ45 connector, and control interface.

    1,100.00
    Add to Cart
  • im120618002_2

    RDM6300 NFC RFID Module

    6300 card reader is a module based on PN532 chip customized for 13.56MHz NFC RFID card, compatible with RDM6300 interface, which can read data directly from the serial interface.

    Unlike ordinary RFID modules, RDM6300 integrates LGT8FF8A chip, compatible with Arduino library, thus we can modify the firmware to suit our own needs. Itead Studio also released….more detail given below

    650.00
    Add to Cart
  • hm10

    HM-10 bluetooth 4.0 module

    HM-10 is a BLE module for embedded system to get BLE wireless communication with BLE capable devices (e.g. iPhone and iPad). It is fully configurable by a rich and well documented AT command-set and allows transparent data communication via serial UART (default baudrate 9600bps). The Bluetooth 4.0 HM-10 is basically a breakout board for cc2541, it broke out the LED pins, RX/TX and also adding the voltage regulator that regular 5v to 3.3 v.

    950.00
    Add to Cart
  • hc05-1

    BLUETOOTH MODULE – HC05

    The Bluetooth Modem is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC-05 module. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target.

    450.00
    Add to Cart
  • XBEE USBADAPTER

    XBee USB Adapter V2 – Atmega8U2

    INTRODUCTION

    The XBee USB Adapter V2 is an update version from DFRobot. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The Atmega8U2 firmware uses the standard USB COM drivers, and no external driver is needed. However, on Windows, a .inf file is required. It’s compatible with all the products using XBee socket. It provides a faster and stable wireless communication for your projects.
    The DFRobot Xbee USB adapter is used for the XBee module configuration parameters to facilitate wireless data transmission. It can be easily connected to a PC via USB cable. Furthermore, it can be used with XBee-setting support software X-CTU. It can also be used as a USB-TTL adapter.
    It is compatible with:
    • All XBee modules including the Series 1 and Series 2.5, standard and Pro version
    • Bluetooth Bee
    • BLE Link (Support wireless programming)
    2,000.00
    Add to Cart
  • XBEE PRO 60MW

    XBee Pro 60mW Wire Antenna

    INTRODUCTION

    This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi (formerly known as Maxstream). The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
    5,500.00
    Add to Cart
  • XBEE2MW

    XBee 2mW Wire Antenna – Series 2 (ZB)

    INTRODUCTION

    This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.

    3,800.00
    Add to Cart
  • xb1mw

    ,

    XBee 1mW Wire Antenna

    INTRODUCTION

    This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
    Pair a couple of these XBees with a Regulated Explorer, and a USB Explorer and you’ve got a great gift for that special electronics geek!
    3,000.00
    Add to Cart
  • 8Ch. Ethernet  Relay Cont.

    , , ,

    8 Channel Ethernet Relay Controller (Support PoE & USB)

    With Ethernet relay, IoT has become so easy. RLY-8-POE-USB is a POE & USB controlled 8 channel relay controller based on STM32. With this module users are able to do remote control/ switching power supply centralized management, the purpose of this product can be directly by net POE power supply switch power supply is connected to the Internet, so you just need to a cable link equipment, suitable for: home decoration, hotel, shopping mall management, Internet cafes, karaoke time, daily office, stores monitoring, networking, industrial control equipment, test equipment, power control, unattended, underground pipes, mining equipment, ships, machine room, street lamp management, intelligent management and centralized management.

    Please read the PoE compatiblity issue before you buy:
    We have passed the test on PoE Switches, list as

    • ONV POE31004P
    • Tenda TEF1008P
    6,200.00
    Add to Cart
  • 433telem1-500x500

    ,

    Telemetry 3DR TTL

    The Radio telemetry system base on 3DR Radio system and 100% compatible.

    It’s designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in 915Mhz and 433Mhz; and in the following configurations: serial board (for the air) and USB (for the ground).

    The system provides a full-duplex link using HopeRF\\\’s HM-TRP modules running custom, open source firmware. Interface to the module is via standard 5V-tolerant TTL serial / FTDI USB serial.

    Firmware upgrades and configuration are fully supported in the APM Mission Planner. Configuration is also possible through the 3DR Radio configurator and AT commands.

    3,800.00
    Add to Cart
  • V03-compatible-Xbee-Arduino-Bluetooh-Bee-Bluetooth-expansion-board-xbee-shield

    ,

    Xbee shield V03

    This shield V03 can achieve a simple two crunodal ZigBee network, achieve wireless communication between Ardu, and allows the Ardu to wireless communicate over a modified ZigBee protocol using the popular XBee module.
    It is a fully Assembled shield without the XBee module. It works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions.
    850.00
    Add to Cart
  • xcore2530_l_1_2

    ,

    ZigBee XCore2530 1500M

    ZigBee module, features the CC2530F256 onboard, farther communication distance with PA

    Overview

    XCore2530 is a ZigBee module based on CC2530F256.

    Basically this module can be used in two aspects :

    • Develop application with the provided firmware
      Combined with our provided firmware, this is a simple ZigBee wireless UART module, just as easy to use as any other UART module, and requires NO knowledge about the complicate ZigBee Specification
    • Develop your own firmware
      In this case, you should start from the very underlying to create your solution, what’s more, debuggers (like CC Debugger) and knowledge about ZigBee Specification are also required
    1,950.00
    Add to Cart
  • shield3-assembly

    ,

    easyvr shield 3.0 (voice recognition shield)

    EasyVR 3.0 is a multi-purpose speech recognition module designed to add versatile, robust and cost effective speech and voice recognition capabilities to virtually any application.

    EasyVR is the third generation version of the successful VRbot module and builds on the features and functionality of its predecessor.

     

    9,350.00
    Add to Cart
  • Mifare_RC522_RFID_Reader_Writer_2-600x600

    Mifare RC522 – RFID reader module 13.56MHz

    MF RC522 is used in highly integrated 13.56MHz contactless communication card chip to read and write, of NXP for “three” and the application launched a low voltage, low cost, small size, non-contact card chip to read and write, intelligent instruments and portable handheld devices developed better.

    500.00
    Add to Cart
  • I2364742561

    ,

    315/433 RXTX KIT

    This is a transmitter+receiver module avilable at 433 & 315 Mhz. The transmitter Module employs a crystal-stabilized oscillator, ensuring accurate frequency control for best range performance. There is no requirement of external RF components except Antenna.

    145.00
    Add to Cart
  • nrf

    ,

    NRF24L01+

    The nRF24L01+(nRF24L01p) is a single chip 2.4GHz transceiver with an embedded baseband protocol engine (Enhanced ShockBurst™), suitable for ultra low power wireless applications. The nRF24L01+ is designed for operation in the world wide ISM frequency band at 2.400 – 2.4835GHz.
    To design a radio system with the nRF24L01+, you simply need an MCU (microcontroller) and a few exter-nal passive components. The high air data rate combined with two power saving modes make the nRF24L01+ very suitable for ultra low power designs. nRF24L01+ is drop-in compatible with nRF24L01 and on-air compatible with nRF2401A, nRF2402, nRF24E1 and nRF24E2. Intermodulation and wideband blocking values in nRF24L01+ are much improved in comparison to the nRF24L01 and the addition of internal filtering to nRF24L01+ has improved the margins for meeting RF regulatory standards.

    200.00
    Add to Cart
  • cc2530-eval-kit_l_1_2

    , ,

    CC2530 Eval Kit

    CC2530 Eval Kit is a ZigBee development/evaluation kit designed for CC2530F256, consists of the mother board ZB502 and the ZigBee moduleCore2530.

    Basically this kit can be used in two aspects :

    • Develop application with the provided firmware
      Combined with our provided firmware, you can use this kit to set up a minimal ready-to-run ZigBee system for testing or evaluating, and requires NO knowledge about the complicate ZigBee Specification
    • Develop your own firmware
      In this case, you should start from the very underlying to create your solution, what’s more, debuggers (like CC Debugger) and knowledge about ZigBee Specification are also required
    2,200.00
    Add to Cart
  • 11216-02a-900x600

    ,

    XBee Pro 60mW PCB Antenna – Series 1

    This is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

    5,300.00
    Add to Cart
  • 11217-01-900x600

    ,

    XBee 2mW PCB Antenna – Series 2 (ZigBee Mesh)

    This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
    These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.
    This Xbee also has a chip antenna which is basically a small chip that acts as an antenna. Quick, easy, cheap, and not in the way.

    3,400.00
    Add to Cart
  • IMG_3834-900x600

    ,

    XBee 1mW Wire Antenna

    This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
    Pair a couple of these XBees with a Regulated Explorer, and a USB Explorer and you’ve got a great gift for that special electronics geek!

    2,900.00
    Add to Cart