View
  • XBEE USBADAPTER

    XBee USB Adapter V2 – Atmega8U2

    INTRODUCTION

    The XBee USB Adapter V2 is an update version from DFRobot. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The Atmega8U2 firmware uses the standard USB COM drivers, and no external driver is needed. However, on Windows, a .inf file is required. It’s compatible with all the products using XBee socket. It provides a faster and stable wireless communication for your projects.
    The DFRobot Xbee USB adapter is used for the XBee module configuration parameters to facilitate wireless data transmission. It can be easily connected to a PC via USB cable. Furthermore, it can be used with XBee-setting support software X-CTU. It can also be used as a USB-TTL adapter.
    It is compatible with:
    • All XBee modules including the Series 1 and Series 2.5, standard and Pro version
    • Bluetooth Bee
    • BLE Link (Support wireless programming)
    2,000.00
    Add to Cart
  • XBEE PRO 60MW

    XBee Pro 60mW Wire Antenna

    INTRODUCTION

    This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi (formerly known as Maxstream). The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
    5,500.00
    Add to Cart
  • XBEE2MW

    XBee 2mW Wire Antenna – Series 2 (ZB)

    INTRODUCTION

    This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.

    3,800.00
    Add to Cart
  • xb1mw

    ,

    XBee 1mW Wire Antenna

    INTRODUCTION

    This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
    Pair a couple of these XBees with a Regulated Explorer, and a USB Explorer and you’ve got a great gift for that special electronics geek!
    3,000.00
    Add to Cart