• 12646-01a


    Teensy 3.1

    The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 brings a 32 bit ARM Cortex microprocessor into the mix so you can do some serious number crunching.

    The Teensy 3.1 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!

    The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs and even an I2S digital audio interface! There are also 4 separate interval timers plus a delay timer! Oh yeah, and all pins have interrupt capability. Also, it can provide system voltage of 3.3V to other devices at up to 100mA.

    Add to Cart
  • beagleboneblack-topweb


    BeagleBone Black

    Beaglebone Black is a low-cost, open source, community-supported development platform. Boot Linux in under 10-seconds and get started on Sitara™ AM335x ARM Cortex-A8 processor development in less than 5 minutes with just a single USB cable. BeagleBone Black ships with the Ångström Linux distribution in on-board FLASH.

    Add to Cart
  • cubieboard-2


    Cubieboard – 2

    Cubieboard2 is a upgrade of the cubieboard, which is based on Allwinner A20 SoC, small size (10cmx6cm), hacker friendly, extendable and very low-cost. Compare with Raspberry Pi, it has higher performance, SATA supported and 96 extended interface. It’s

    Since cubieboard2 and cubieboard share the same PCB, so all the accessories work with cubieboard can also fit cubieboard2.

    Add to Cart