View
  • rds3115mg

    Servo RDS3115 MG Dual Axis (16.5 Kg.cm)

    General Specification

    • Storage temperature range: -20°C ~ 60°C
    • Operating temperature range: -10°C ~ 50°C
    • Operating voltage: 5V ~ 7.2V
    2,200.00
    Add to Cart
  • tower-pro-mg995-13kg013s-60g-standard-servo

    Tower Pro Servo MG995 (13 Kg.cm) (Copy)

    Product Model MG995/945/996 products size 40.7 * 19.7 * 42.9mm Weight 55g Work to torque 13KG/cm reaction speed 53-62R / M use temperature -30 ~ +60 ° Dead-set 4 microseconds plug type JR FUTABA general rotation angle up to 180 degrees Servo type analog servos operating current of 100mA voltage of 3-7.2V Structural material metal copper teeth, coreless motor, double ball bearing no load Operating speed of 0.20 seconds / 60 degrees (4.8V); 0.16 seconds / 60 degrees (6.0V) The attachment contains helm, the line length 30CM, fixing screws, damping pouches and aluminum sets and other accessories (see really making plans) Scope Biped robot, robot, suitable for 50 -90 grade methanol fixed-wing aircraft and 26cc-50cc gasoline fixed-wing aircraft models.

    750.00
    Add to Cart
  • MG-90S(2)

    Micro Servo MG-90 (2.2Kg.cm)

    Do you need a servo for a tiny little project? Or are you seeking for an affordable solution? This mini metal servo is quite impressive, it does quite the job for a large range of tasks. With metal gear, it could gives you a 2.2 Kg*cm torque. Pretty strong regarding its size. Suitable for Beam robots and other automation tasks. Keep in mind that if you need some heavy lifting you should be considering some of our other options. This servo is for you if you are planning on building smaller size robots.

    500.00
    Add to Cart
  • MG996R-

    Tower Pro MG996R – 360Deg (11 Kg.cm)

    This is an upgraded version of the famous Towerpro MG996R servo. It has now been redesigned with a  PCB and IC controll system which makes it perfect for robotic use as it has the capability of rotating clockwise and anti-clockwise continously if you wish to do so. Its internal gearing and motor are also upgraded to improve dead bandwith and centering.

    800.00
    Add to Cart
  • MG996R-

    Tower Pro MG996R – 180Deg (11 Kg.cm)

    This is an upgraded version of the famous Towerpro MG996R servo. It has now been redesigned with a  PCB and IC controll system which makes it perfect for robotic use as it has the capability of rotating clockwise and anti-clockwise continously if you wish to do so. Its internal gearing and motor are also upgraded to improve dead bandwith and centering.

    800.00
    Add to Cart
  • S3003

    Servo Futaba S3003 180Degree

    Controlling a servo is easy by using a microcontroller, no external driver like h-bridge etc are required. Just a control signal is needed to be feed to the servo to position it in any specified angle. The frequency of the control signal is 50hz (i.e. the period is 20ms) and the width of positive pulse controls the angle.

    650.00
    Add to Cart
  • S3003

    Servo Futaba S3003 360Degree

    Controlling a servo is easy by using a microcontroller, no external driver like h-bridge etc are required. Just a control signal is needed to be feed to the servo to position it in any specified angle. The frequency of the control signal is 50hz (i.e. the period is 20ms) and the width of positive pulse controls the angle.

    700.00
    Add to Cart
  • micro-servo-motor-sg90 (1)

    ,

    Micro Servo SG-90

    The TowerPro SG90 mini servo is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck use.

    250.00
    Add to Cart
  • df metal geared 15 kg

    DF Metal Geared 15Kg Standard Servo 180° (DSS-M15)

    INTRODUCTION

    DSS-M15 is a heavy-duty metal gear standard servo with 180°wide angle, high torque power, improved stability and durability.

    Able to take in 6V and deliver a strong torque power of over 15Kg, this tough 180°servo will never let you down when you need it. Tested with high load capacity for 12 hours long, this DSS-M15 servo demonstrates a maximum torque of 18Kg without much vibration or heat.

    1,800.00
    Add to Cart
  • motor 12v151rpm1

    Metal DC Geared Motor w/Encoder – 12V 251RPM 18Kg.cm

    This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 700 counts per revolution of the gearbox’s output shaft.
    These units have a 0.61″ long, 6 mm(0.24″)-diameter D- shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V.
    The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm(0.61″) apart.
    This motor is an ideal option for your mobile robot project.
    Warning: Do not screw too far into the mounting holes as the screws can hit the gears. Manufacturer recommends screwing no further than 3mm (1/8″) into the screw hole.
    3,000.00
    Add to Cart
  • motor12v 122rpm

    ,

    Metal DC Geared Motor w/Encoder – 12V 122RPM 38Kg.cm

    This is a Gear Motor w/Encoder, model No. GB37Y3530-12V-90EN. It is a powerful 12V motor with a 90:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 1440 counts per revolution of the gearbox’s output shaft.

    These units have a 0.61″ long, 6 mm-diameter D- shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V.
    The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm apart.
    This motor is an ideal option for your mobile robot project.

    Note: Do not screw too far into the mounting holes as the screws can hit the gears. Manufacturer recommends screwing no further than 3mm (1/8″) into the screw hole.

    3,000.00
    Add to Cart
  • motor Wencoder 350rpm 12v

    ,

    12V DC Motor 350RPM w/Encoder (12kg*cm)

    This is a gear motor with encoder. It is a motor with a 34:1 gearbox and an integrated quadrature encoder that provides a resolution of 11 pulse single per round giving a maximum output of 374 within one round. With an Arduino controller and motor driver, applications for this include a closed-loop PID control or PWM motor speed control. This motor is an ideal option for mobile robot projects. The copper output shaft, embedded thread and reinforced connector greatly extends the motor’s service life.

    3,000.00
    Add to Cart