View
  • 3892ad6b-3324-4790-bddf-0197ed6ca8f8

    , , ,

    WeMos D1 — UNO like wifi board based ESP-8266

    WeMos D1 WiFi UNO ESP-12E Based ESP8266 Shield For Arduino Compatible

    Description:

    This is the old version of WeMos D1.
    11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
    1 analog input(3.3V max input)
    A Micro USB connection
    A power jack, 9-24V power input.
    Compatible with Arduino
    Compatible with nodemcu

    Infos: click here!!

    Package included:

    1 x WeMos D1 WiFi UNO ESP-12E Based ESP8266 Shield For Arduino Compatible

    800.00
    Add to Cart
  • baron 4wd

    Baron-4WD Arduino Mobile Robot Platform with Encoder

    INTRODUCTION

    The DFRobot 4WD Arduino-Compatible Platform w/Encoders is widely used on the world’s self-developed control panel platform. This drive method has a strong obstacle and climbing ability with high strength aluminum alloy body. It features thick acrylic material to eliminate the heavy, fragile thin acrylic material defects. The powerful motor performance, flexible and rapid movement is especially suitable for outdoor grass, gravel, sand, or slope pavement.It is very useful for robot competitions and other research projects. It’s car mounting holes is compatible with a variety of sensors. There is enough space within the car to install the battery. It is made with the consideration to facilitate the future expansion of PTZ cameras or more degrees of freedom manipulator. This platform comes with two sets of encoder can be precise control of the car trip, and the closed-loop PID control.

    5,300.00
    Add to Cart
  • vortex a new

    Vortex – A New Robot Teaches Kids About Coding (Single Pack)

    Vortex is an intelligent and responsive robot that will enable children to learn, play and coding. Vortex will bring together robotics with digital games through fun and interactive apps that allow children to explore, program their own games and solve problems.

    12,000.00
    Add to Cart
  • AURDINO UNOR3

    ,

    Arduino Uno R3 – Original Italian

    INTRODUCTION

    This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.

    The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.

    Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

    Warnings: The Arduino Uno R3 requires the Arduino 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine. If you are interested in reading more about the changes to the IDE, check out the official Arduino 1.0 Release notes!

    3,000.00
    Add to Cart
  • 37-in-1-font-b-Sensors-b-font-Modules-Starter-font-b-Kit-b-font-for

    , ,

    37 in 1 Sensor Module Kit for Arduino And Raspberry Pi

    With this 37 in 1 sensor ultimate package compatible with Arduino & Raspberry Pi , you can do almost all the experiment you can think of , never need to worry about again you don’t have proper materials . this do save you a lot of time .

    2,000.00
    Add to Cart
  • HT1rjz1FGdXXXagOFbXH

    ,

    W5100 Ethernet Shield

    The Arduino Ethernet Shield  uses the Wiznet W5100 and includes an microSD card slot. The shield uses the six pin ICSP header for the SPI signals, making it compatible with both the regular Arduino form factor (Duemilanove, Uno) and also the Mega 1280 and Mega 2560 Arduinos

    800.00
    Add to Cart
  • ARDUINO_NANO_03

    ,

    Arduino Nano V3

    The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) orATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.

    400.00
    Add to Cart
  • mega2560

    ,

    Arduino MEGA 2560

    The Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

    800.00
    Add to Cart
  • ArduinoUnoR3

    ,

    Arduino UNO R3

    The Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started

    500.00
    Add to Cart