UNO R3 SMD – Economic
₨400.00
The Uno R3 module is a cheap alternative to the Arduino Uno Boards. It is equipped with an ATMEL AVR ATmega328P microcontroller and a updated USB-controller for cost reduction. The specifications are equal to Arduino Uno R3.
The board is shipped with the shown pin headers.
Please note that the boards have a CH340G USB-Controller. They are recognized on Linux without any additional drivers. Mac OS and Windows users may need to install an additional driver.
Product Description
| Microcontroller: | ATmega328 |
| Operating Voltage: | 5 V |
| Input Voltage: | 5 – 12 V |
| Digital I/O Pins: | 14 (of which 6 provide PWM output) |
| Analog Input Pins: | 6 |
| DC Current per I/O Pin: | 40 mA |
| Flash Memory: | 32 KB (of which 0.5 KB used by bootloader) |
| SRAM | 2 KB |
| EEPROM: | 1 KB |
| Clock Speed: | 16 MHz |
Only logged in customers who have purchased this product may leave a review.
Related Products
-
Arduino ProMini 5V/16MHZ
The Arduino Pro Mini is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.
The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.
₨400.00 -
Arduino UNO R3
The Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started
₨500.00 -
GPS Arduino Shield
This is a GPS module breakout board with SD storage based on the u-blox NEO-6M GPS and its foot print is compatible with arduino boards . This board features an SD card socket, which makes it convenient for building data loggers.
₨3,000.00 -
Arduino Nano V3
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) orATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.
₨400.00
Reviews
There are no reviews yet.